So i am brand new to the forum and community. I have been searching all over for an NES RGB Multi-out cable. I realize that one was never made or existed for a factory console with a Multi-out Male. (i have found the SHVC-010) but I am looking for the multi out plug to just a standard set of component RCA jacks and some red white RCA for audio.
Has anyone ever made one? I am wondering if its possible to just Mod the SHVC-010 and cut off the SCART end and add component RCAs onto that with the audio.
The Multi-out port on my NESRGB is fully wired with all the pins active so in theory it should work. I am just curious if anyone has tried it or if there is anything that i should thing about before buying a 70$ cable and modifying it.
Also if anyone has any other suggestions id love to hear how anyone has dealt with this.
Thanks!
Edit: So i have located some cables that i would probably end up using here:
http://www.ebay.com/itm/Super-Nintendo-SNES-RGB-N64-sync-on-luma-RGB-SCART-lead-SHIELDED-GROUNDED-cable-/161569281372?hash=item259e47955c:g:nOMAAOSw-vlVgu-1
http://www.ebay.com/itm/Super-Nintendo-stereo-RGB-SCART-lead-SNES-CSYNC-FULL-SHIELD-GROUNDED-cable-/201284360714?hash=item2edd7b9a0a:g:awgAAOSw~gRVgu65
does anyone know what would be the ideal cable here.
Basically i want to cut off the SCART plug on the end and terminate the proper RCA end on each of the cables for RGB and RL audio. maybe even terminate the composite (yellow) RCA that is in there too. I would consider doing the S-Video so that it is a fully functional cable with every option for a fully wired multi out NES RGB.
Any ways thanks again for checking out my post.
EDIT 2: I am just taking a look at the RGB NES operation block diagram and it looks like there is a TTL Composite Sync wire that goes to the multi out. does that mean CSYNC?
Has anyone ever made one? I am wondering if its possible to just Mod the SHVC-010 and cut off the SCART end and add component RCAs onto that with the audio.
The Multi-out port on my NESRGB is fully wired with all the pins active so in theory it should work. I am just curious if anyone has tried it or if there is anything that i should thing about before buying a 70$ cable and modifying it.
Also if anyone has any other suggestions id love to hear how anyone has dealt with this.
Thanks!
Edit: So i have located some cables that i would probably end up using here:
http://www.ebay.com/itm/Super-Nintendo-SNES-RGB-N64-sync-on-luma-RGB-SCART-lead-SHIELDED-GROUNDED-cable-/161569281372?hash=item259e47955c:g:nOMAAOSw-vlVgu-1
http://www.ebay.com/itm/Super-Nintendo-stereo-RGB-SCART-lead-SNES-CSYNC-FULL-SHIELD-GROUNDED-cable-/201284360714?hash=item2edd7b9a0a:g:awgAAOSw~gRVgu65
does anyone know what would be the ideal cable here.
Basically i want to cut off the SCART plug on the end and terminate the proper RCA end on each of the cables for RGB and RL audio. maybe even terminate the composite (yellow) RCA that is in there too. I would consider doing the S-Video so that it is a fully functional cable with every option for a fully wired multi out NES RGB.
Any ways thanks again for checking out my post.
EDIT 2: I am just taking a look at the RGB NES operation block diagram and it looks like there is a TTL Composite Sync wire that goes to the multi out. does that mean CSYNC?