N64 homebrew cartridge can not save sram.

This is my n64 homebrew cartridge,I have flash a n64 game called biohazard2.

But in game, can not save sram.
when I read 32k sram from cartridge, 32k data only the first 4byte show BIO2, others data is all 0x00.

Do you have the source for the logic in the MAX2 ?

More-or-less the only other thing you could do would be to compare a known good save to the wrong values you're getting.

This is core mycode:


It's work on game "Ogre Battle 64 - Person of Lordly Caliber (U) (V1.0) [!]";

At this point, I'd compare to a known-good save from e.g. an emulator.

Maybe it's depend on the CIC, but I'm not sure.

If it were the wrong CIC, that would prevent booting altogether ... unless it both needs, and you have, a bad implementation of the 6105.

(The hash of the first 4 KiB of the cart ROM has to match the hash presented by the CIC or else the PIF goes into an infinite loop. If the hash does match, then it passes off execution in those 4 KiB)

1 How to change a homebrew rom to a spencified cic(ex: 6105,only boot on a 6105cic).
2 My verilog code is wrong.

The x101 and x102 boot sectors can be just directly interchanged; the other three CICs each do something different and can't be easily swapped.

Flashcarts like the everdrive64 reimplement the boot sectors in order to allow running everything as though it were on a 6102/7101.

Maybe need a bootemu, first will boot to bootemu,next swap the rom section via mmc,then boot to gamerom.

BTW, I solved the sram problem.

What was wrong?

SRAM logic not same as ROM logic.