I'm trying to wire up a flash chip using the extension port on the back of a Turbo Graphics 16. It looks like it has full access to all the pins on the HuCard connector so it should work in theory. The schematic I'm using for a reference has an 29f800 instead of my 29f016. The only difference is the 29f800 has a line called q-15/a-1 connected to A0 of the HuCard connector and the 29f016 has no such pin. Instead I just wired up A0 to pin A0 and so on up to A19. Would that be correct or should have I skipped A0 on the cart connector and started with a1 going to a0 on my 29f016?
Extension pinout
http://www.gamesx.com/misctech/pcebp.php
Schematic
http://www.gamingenterprisesinc.com/Flash_HuCard/HuCard_Schematic_V11.pdf
29f800
http://www.macronix.com/Lists/Datasheet/Attachments/1492/MX29F800C%20T-B,%205V,%208Mb,%20v1.2.pdf
29f016
http://pdf1.alldatasheet.com/datasheet-pdf/view/92565/AMD/AM29F016-120.html
Extension pinout
http://www.gamesx.com/misctech/pcebp.php
Schematic
http://www.gamingenterprisesinc.com/Flash_HuCard/HuCard_Schematic_V11.pdf
29f800
http://www.macronix.com/Lists/Datasheet/Attachments/1492/MX29F800C%20T-B,%205V,%208Mb,%20v1.2.pdf
29f016
http://pdf1.alldatasheet.com/datasheet-pdf/view/92565/AMD/AM29F016-120.html