Yeah, that's right.
Looking up resistor color code (I don't have it memorized since I mostly jumped into the surface-mount stuff) it is red, red, red for 2.2kOhm.
Quote:
At first the adapter was grounded to the pc chassis then willem card but of course neither worked. Could this have damaged the tsop?
Seems possible, but I don't know how likely. I guess it could even depend on your house's wiring and stuff. Use a voltmeter to check the difference between the circuit's ground and chassis ground. Maybe any difference more than 0.75V would be bad for the chip.
If you were curious, chassis or earth ground (same thing, correct me if I'm wrong) is there to let current escape to ground, otherwise it becomes easier for the human body to become the escape route, heheh. At one point I found out there was a bad ground connection in my basement because I was getting shocked while soldering some NES boards, I getting zapped through the traces, on individual edge connector pins. It's like a really painful way to do an electrical test of a board, haha.