My Eprom cart's do not work. Since I am not using a socket, I am not scratching the PCB. I am lifting the legs of the eproms.
http://www.ultimate-console.fr/images/s ... c00922.jpg
Like the picture above, is how I wired my cartridges.
I KNOW THAT MY EPROMS ARE PROGRAMMED CORRECTLY. ( I programmed them, verified them, and re-read them and played the image from the eprom on Snes9x, and I got my friend to read the eprom at his house too so I can guarantee you that the eprom is indeed programmed with data, and that data is tested working.) The header was removed with Snestool and I checked the buffer on my willems programmer to make sure there was no header, it is also 1048576 bytes, so again, eprom is not the issue.
I used phone cables and ripped them open and use the insulated 22gauge? wire from inside them as wiring. I used a Lufia rom (in a Xardion NTSC cart) and a Dragons Lair rom (inside an David Crane's amazing tennis cart).
Is it my wires? What kind of wire should I use then?
Thanks
http://www.ultimate-console.fr/images/s ... c00922.jpg
Like the picture above, is how I wired my cartridges.
I KNOW THAT MY EPROMS ARE PROGRAMMED CORRECTLY. ( I programmed them, verified them, and re-read them and played the image from the eprom on Snes9x, and I got my friend to read the eprom at his house too so I can guarantee you that the eprom is indeed programmed with data, and that data is tested working.) The header was removed with Snestool and I checked the buffer on my willems programmer to make sure there was no header, it is also 1048576 bytes, so again, eprom is not the issue.
I used phone cables and ripped them open and use the insulated 22gauge? wire from inside them as wiring. I used a Lufia rom (in a Xardion NTSC cart) and a Dragons Lair rom (inside an David Crane's amazing tennis cart).
Is it my wires? What kind of wire should I use then?
Thanks