Hello everyone.
I've been doing a bit of research and I've gathered a bit of information. The first thing I did was attempted to understand how the MAD-1 works.
Please correct me if I'm wrong. If I get the okay, I'll go ahead and purchase the necessary chips.
First of all, Shin Megami uses the SHVC-2A3M-10 board.
I'm using the ACTUAL Japanese cartridge. Here is a snapshot of it. Note that I mislabeled the MAD-1 chip.
So, since the game itself is 2.50MiB (2,621,440 bytes, 0x280000) each ROM chip is at least 2MiB (16Mbit).
So the first 0x200000 bytes are in P0 (ROM #1) and the remaining 0x80000 are in P1 (ROM #2).
TL;DR: I need two Am29F032B with the TSOP adapter (I haven't looked into which one I need since the Am29F032B has 40 pins).
Is there anything else that I'm missing?
I've been doing a bit of research and I've gathered a bit of information. The first thing I did was attempted to understand how the MAD-1 works.
Please correct me if I'm wrong. If I get the okay, I'll go ahead and purchase the necessary chips.
First of all, Shin Megami uses the SHVC-2A3M-10 board.
I'm using the ACTUAL Japanese cartridge. Here is a snapshot of it. Note that I mislabeled the MAD-1 chip.
So, since the game itself is 2.50MiB (2,621,440 bytes, 0x280000) each ROM chip is at least 2MiB (16Mbit).
So the first 0x200000 bytes are in P0 (ROM #1) and the remaining 0x80000 are in P1 (ROM #2).
TL;DR: I need two Am29F032B with the TSOP adapter (I haven't looked into which one I need since the Am29F032B has 40 pins).
Is there anything else that I'm missing?