@tokumaru
Thank you for your effort, I think I'm starting to understand a little better
So for example, I choose 2-Megabit 256K x 8 OTP EPROM, and then start to compare...the pins that are not matching must be bend and properly rerouted. I will try to do the plan but could you just tell me what rules should apply, I mean what is MUST NOT connect. (I'm not in programming)
I assume that the 1,2,31,30,24 are the pins that I must change/reroute.
PRG ROM - 256KBytes (32pin):
PRG A17 - |01 32| - +5V
PRG /CE - |02 31| - +5V
PRG A15 - |03 30| - +5V
PRG A12 - |04 29| - PRG A14
PRG A7 - |05 28| - PRG A13
PRG A6 - |06 27| - PRG A8
PRG A5 - |07 26| - PRG A9
PRG A4 - |08 25| - PRG A11
PRG A3 - |09 24| - PRG A16
PRG A2 - |10 23| - PRG A10
PRG A1 - |11 22| - PRG /CE
PRG A0 - |12 21| - PRG D7
PRG D0 - |13 20| - PRG D6
PRG D1 - |14 19| - PRG D5
PRG D2 - |15 18| - PRG D4
GND - |16 17| - PRG D3
2-Megabit 256K x 8 OTP EPROM (32pin):
VPP - |01 32| - VCC
A16 - |02 31| - PGM
A15 - |03 30| - A17
A12 - |04 29| - A14
A7 - |05 28| - A13
A6 - |06 27| - A8
A5 - |07 26| - A9
A4 - |08 25| - A11
A3 - |09 24| - OE
A2 - |10 23| - A10
A1 - |11 22| - /CE
A0 - |12 21| - 07
O0 - |13 20| - 06
O1 - |14 19| - 05
O2 - |15 18| - 04
GND - |16 17| - 03